|
Maintenance of crusher machine ： 1、bearing crusher bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship, it directly affects the life of the machine and the operation rate, which requires the injection of oil must be clean, seal must be good this machine main oiling at: (1) Turn the bearing (2) roller bearing (3) all gears (4) activities bearings; 2、the newly installed tire prone to loosening must always be checked. Test： 1、the device should be installed on a level concrete foundation with anchor bolts; 2、note that the main body should be installed vertically and horizontally; 3、according to the configuration of power equipment and power line control switch; 4、After installation check all parts for loose bolts and doors are secure host. General Provisions： 1、 reproduced, crusher machine driver must be trained to achieve "three know" (to understand the structure, to understand the performance, understand the principle), "Four" (use, maintains, would be maintained, it will deal with failure), through training and examinations qualified, after obtaining the certificate, shall be allowed to operate posts. 2、 with a face conveyor driver closely with transport conveyor lane drivers, unified signal contact, in order to open, was closed. There are a large lump, when gangue crusher feed opening accumulation spills, should stop working and surface scraper conveyor operation. If the big lump, gangue not enter break transfer or metal objects. |
