|
Notes of using the crusher bearings: (1) keep their surroundings clean bearings; (2) When using carefully: careless to bearing a strong impact, would appear bearing scars, indentation, fracture and other injuries if used; (3) Use the right tools; (4) Note the bearing to avoid rust in humid places to use, but not to sweat stained, should wear gloves. In the chemical industry and the power sector, crusher machine makes the raw material crushing, grinding, increasing the surface area of the material, and create favorable conditions for the chemical reaction of materials to shorten the time. With the rapid development and rapid decrease of industrial resources, recycling waste production departments is important, then the processing of these waste processing required mechanical crushing crushed. Examination and treatment: 1. various parts of the motor, reducer, hydraulic couplings, nose, tail and other couplings must be complete, intact. Fastening reducer, hydraulic shaft section should be no oil leakage, oil spills, oil should be appropriate; 2. the signal must be sensitive and reliable, no signal is allowed to boot spray sprinklers to ensure integrity; 3. power cables, operating lines must hang neatly, no squeezed phenomenon; 4. the head near the coal, waste rock, debris and motor, reducer must sweep clean coal dust; 5. Face scraping conveyor head and tail lap loader to the right; 6. moderate critical scraper chain plate, scraper and tighten the screws must be complete; 7. the loader must trolley stable and reliable; 8. the next part of the deck loader boot situation, the ministries of primary drying equipment operation should be no abnormal sound, scraper, chains, and even Adaptor should be no twist scratch, twist twist, bending; 9. crusher machine , crusher at the roadway must protect intact, firm; 10. a safety net and protection of crusher machine, to ensure that no deformation does not fail, safe and reliable; 11. loader, roadway must be intact and firm at crusher machine. |
