|
Jaw Crusher's preparations: (1) Carefully check the bearing lubrication is good, whether the connection has enough grease thrust plate; (2) Carefully check all fasteners are tightened; (3) Carefully check the belt is good. If found to have broken the phenomenon, should be replaced when there is oil on the drive belts or pulleys, oil rag and wipe application; (4) Check the protective device is good, when there is insecurity found, should be excluded; (5) Check whether the ore crushing cavity or debris, while if the ore or debris must be cleaned to ensure that the crusher machine cavity start. Precautions of Jaw Crusher (1) the normal operation of the crusher machine before feed production. (2) should be shredded material evenly join crusher machine cavity, lateral feeding should be avoided or filled with feeding, so as not to overload or unilateral withstand overload. (3) work, bearing temperature rise should not exceed 30 ℃, the maximum temperature should not exceed 70 ℃. When the temperature exceeds the above, it should be immediately stopped, identify and eliminate the cause. (4) before stopping, you should first stop feeding until after the crushing cavity material is fully discharged before power is turned off. (5) when broken, as a result of the crushing cavity material obstruction caused by parking, you should immediately turn off the power to stop running, will clean up after the crushing cavity material before re-starting. (6) After the end of the jaw wear can turn around and use. (7) the crusher machine after a period of time should be tight sleeve loose and damage the machine. |
